Hardwood Floor Refinishing
The oak hardwood floor in our house was old and looked dirty, with many scratches that showed the traffic pattern of the people before us. There were places where the protective coating had worn out and the wood turned gray and black, which didn't look nice. We wanted to resurface the floor before we move in to make it look new again. Since sanding the floor will create tons of dust, we wanted to do it before we move things in. We began on Veteran's Day, Nov. 11 and rented a floor sander from The Home Depot. These sanders are very heavy and uses a very large sheet of sand paper. The base moves in a small circular motion to sand the floor and we started with 24 grit to remove the old finish, followed by 60 grit and 100 grit. I pushed the sander around for 10 hours that day and returned the sander the next morning. It didn't come out perfect because there are some deep swirl marks that we couldn't get rid of. For the most part, the floor is a lot better than when we start...
i like the top one more and tiaras that are smaller
ReplyDelete